Simulation
위에서 언급한 오일샌드로부터 bitumen을 추출하는 2가지 방법은 물리적인 힘을 가하는 방법이므로 아스펜으로 simulation하기 힘들었다. 따라서 upgrading공정에 대하여 아스펜으로 simulation을 해보았다. 공정도 자체를 그리는 것은 어렵지 않았으나, 각각의 경우에 대하여 구체적인 수치를 대입하지
Abstract
High price of main grains is recent issue in the global market. International price of main grains has risen since 2007. High price of main grain becomes serious problem not regionally but in global. Then policy for stabilizing the situation will be dealt with in this paper. On the supply side, low stocks of world grains affect to world grain prices. Escalating energy prices is also ca
2.3.3 Process Explanation
1) Foolish Model
주어진 raw meterial에서 glucose를 얻는 당화공정과 이후 fermentation을 이용해 ethanol을 얻는 process로 실제의 공정보다 매우 단순화 되어있는 model. ethanol 생성공정을 거치면서 발생한 impurity는 이 모델에 포함된 centrifuge공정에 의해 분리되어 처리된다. foolish model의 output 으로
Ⅲ. 결론
태양광 전력변환장치에서는 Boost 컨버터와 인버터를 같이 사용하여 전력을 변환시키는 것을 알게 되었다. 이에 따라 계통 연계 태양광 인버터에 대한 전력 변환 시스템을 컴퓨터 시뮬레이션 프로그램인 PLECS를 이용하여 시뮬레이션을 진행하였다.
Boost 컨버터 회로도를 만들고 =40[V], 듀티비
Reasons of using Cellulose
Why Cellulose?
There are Abundant resources in Earth.
- Don’t have to worry about running out the energy.
We don’t need to waste food.
- Solve the ethic problems for using other biomass.
We can reduce GHG(Green House Gas).
- Eco friendly energy.
What's the problems?
It is difficult to separate the cellulose from wood.
- Components of wood :
1. 서론
1.1. 연구목적 및 방법
■ 연구의 목적
자동차 배기가스로 인한 환경오염을 해결하기 위해 무연휘발유를 개발하였다. 무연휘발유는 옥탄가 향상제로 산소계 화합물인 에테르 화합물은 높은 산소 비율로 휘발유 불완전 연소 감소 및 배기가스 중 일산화탄소의 양을 줄여 대기오염의 감소 효
Assumptions
잠수복의 재질은 neoprene으로 일정.
옷의 재질은 cotton wool로 일정.
체온은 36.5℃로 일정
바닷물의 온도는 16.5℃로 일정.
Radiation에 의한 열전달은 없음.
Homogeneous Boundary Condition.
One dimensional unsteady state.
2 layers are well contacted.
모든 설정을 마치고 일단 임의의 단수로 설정한뒤 시뮬레이션을 돌려보아,설계에 오류가 존재하는지 여부를 파악합니다.
(*Liquid Rate는 200,200,200,으로 진행하였는데, 오류가 나서 200,100,50으로 설정하였습니다.)
-모든 시뮬레이션 설계를 마쳤다면 이제는 각 증류탑별로 단수를 하나하나 설정하여,
가
2) 대류 열전달계수(coefficient of convection heat transfer)
매뉴얼에 주어진 h값의 표를 보간하여 이번 실험에서 사용할 대류 열전달계수(coefficient of convection heat transfer) h를 구하도록 하겠다. steady state에서의 온도는 다음과 같이 주어진다.
22.63°
41.3°
26.9°
위의 값들을 이용하여 매뉴얼에 주어진 표